Cubic Yard Calculator

Work out cubic yards from length, width and depth, plus concrete bags and material weight.

Slab depth is usually measured in inches, for example 4 inches.

Formula and Worked Example

Convert every measurement to feet first: inches divided by 12, yards multiplied by 3. Then multiply length by width by depth to get cubic feet, and divide by 27 to get cubic yards.

cubic feet = length (ft) x width (ft) x depth (ft)

cubic yards = cubic feet / 27

cubic meters = cubic feet x 0.0283168

Worked example: a concrete slab

A slab 10 ft long, 8 ft wide and 4 inches deep. Depth 4 in equals 1/3 ft. Volume equals 10 x 8 x 1/3, which is 26.67 cubic feet. Divide by 27 to get 0.99 cubic yards, so order 1 cubic yard. At the typical yield of 0.60 cubic feet per 80 lb bag, that slab needs 45 bags (26.67 / 0.60 = 44.45, rounded up).

About the Cubic Yard Calculator

A cubic yard is the volume of a cube that measures one yard on every side, which is 3 feet long, 3 feet wide and 3 feet deep. Because 3 multiplied by 3 multiplied by 3 equals 27, one cubic yard holds exactly 27 cubic feet. Suppliers of concrete, topsoil, mulch, gravel and sand sell by the cubic yard, so knowing how to convert your measurements into cubic yards is the first step in ordering the right amount and getting a fair price.

To use the calculator, measure the length and width of the area and the depth or thickness of the material. For a patio slab, the depth is the thickness of the concrete. For a garden bed, it is how deep you want the topsoil or mulch. Enter each measurement with its own unit, because a slab is often measured in feet across and inches deep. The calculator converts inches and yards to feet first, then multiplies length by width by depth to get cubic feet, and divides by 27 to get cubic yards. It also shows the volume in cubic feet and cubic meters, which helps when a supplier quotes in metric units.

The concrete bag table answers the most common follow up question: how many bags do I need? A 40 lb bag of concrete mix typically yields about 0.30 cubic feet, a 60 lb bag about 0.45 cubic feet, and an 80 lb bag about 0.60 cubic feet. The calculator divides your total cubic feet by each yield and rounds up, because you cannot buy part of a bag. Buying bagged concrete makes sense for small jobs such as fence posts and small pads, while a ready mix truck is usually cheaper once the job passes about one cubic yard.

The weight table helps with delivery and handling. Concrete is heavy at a typical 4,000 lb per cubic yard, topsoil is about 2,000 lb per cubic yard, gravel about 2,800 lb per cubic yard, and mulch is light at about 500 lb per cubic yard. These are typical values only. Wet soil weighs more than dry soil, crushed stone weighs more than rounded gravel, and mulch density changes with wood type and moisture, so always confirm the weight with your supplier before booking a truck or checking a trailer limit. All calculations run in your browser, and nothing you enter is stored or sent anywhere.

Frequently Asked Questions

There are 27 cubic feet in one cubic yard, because a cubic yard is a cube 3 feet long, 3 feet wide and 3 feet deep, and 3 x 3 x 3 equals 27. To convert cubic feet to cubic yards, divide by 27.
Measure the depth in inches, then divide by 12 to get feet. A 4 inch slab is 1/3 of a foot deep, and a 6 inch slab is 1/2 of a foot deep. This calculator converts inches to feet for you when you pick inches in the depth unit selector.
At the typical yield of 0.60 cubic feet per 80 lb bag, one cubic yard (27 cubic feet) needs 45 bags. For 60 lb bags at 0.45 cubic feet each you need 60 bags, and for 40 lb bags at 0.30 cubic feet each you need 90 bags. Always round up and buy one or two extra bags for spillage and uneven ground.
A cubic yard of topsoil typically weighs about 2,000 lb, or 1 US ton, but the real figure varies with moisture and soil type. Wet topsoil can weigh noticeably more than dry topsoil. The weight table on this page uses 2,000 lb per cubic yard as a typical value.
A cubic yard of concrete typically weighs about 4,000 lb, or 2 US tons. That is why the weight table shows 12,000 lb (6 tons) for a 3 cubic yard pour. Always confirm the exact weight with your supplier before booking a truck.
Yes. Most suppliers and builders recommend ordering 5 to 10 percent extra to cover spillage, uneven ground, compaction and measuring errors. It is cheaper to have a little left over than to pay for a second small delivery.
Yes, free with no signup required. All calculations run in your browser and nothing you enter is sent anywhere.

Related Calculators

Was this tool helpful?

Comments

Loading comments...

Check Out Other Popular Tools