TV Screen Test

Test your TV or monitor right here, on the screen itself. Dead pixels, backlight bleed, banding, HDR, and refresh rate, plus a straight verdict: is your TV ready for GTA 6? New here: a 3D motion test you can steer, and a QR code that opens this page on your TV in seconds.

Quick answer

Open this page on your TV, run the tests, get a verdict. No download, no account, nothing uploaded.

Most smart TVs have a web browser. Open cubbbix.com/tv-screen-test/ in it, or cast this tab from your phone or laptop. The tests run full screen on your TV, and your TV remote arrows move through the colors. Everything runs in your browser, on your device.

GTA 6 is out now on PS5 and Xbox Series X|S, and it targets 30fps. For this game, 4K and HDR decide the picture. A 120 Hz panel is a bonus, not the point. The verdict below says which one your TV is.

Open this on your TV

QR code that opens the Cubbbix TV Screen Test at cubbbix.com/tv-screen-test/

Typing a web address with a TV remote is slow. Scan this code with your phone camera instead. It opens this test on your phone. Then cast your phone screen to your TV, or type the address below in your TV web browser.

cubbbix.com/tv-screen-test/

Your screen right now

These numbers come from your browser, live. If a number looks wrong, check the TV picture settings first, then the HDMI port and cable.

Resolution
Reading...
Screen size in pixels.
Refresh rate
Measuring...
Measured live over about 2 seconds.
HDR
Checking...
Whether HDR is on in your system.
Color depth
Reading...
Bits per pixel your browser reports.
Color range
Reading...
sRGB or wide P3 color.
Screen size
Reading...
Browser window size in pixels.

Is my TV ready for GTA 6?

Press the button and this page scores your TV on the three things that matter for GTA 6: resolution, HDR, and refresh rate. GTA 6 targets 30fps, so refresh rate counts least. 4K and HDR count most.

No verdict yet. Press "Check my GTA 6 verdict" above, or the button below.

Honest limits: this check reads what your browser reports. It cannot measure input lag, and it cannot measure peak HDR brightness in nits. For those numbers, see our Best TV for GTA 6 guide, which lists published lab measurements.

Test 1: Dead and stuck pixels

Full screen solid colors. A dead pixel stays black on every color and shows best on white. A stuck pixel stays lit in one color and shows best on black. Look closely at each color, especially the corners.

Move with the remote arrows, a click, or a tap. Press Esc or the back button on the remote to stop.

Test 2: Backlight bleed and uniformity

Black and gray screens in a dark room. Bright patches along the edges on black are backlight bleed. Cloudy patches on gray are poor uniformity. Turn the lights off and give your eyes 30 seconds to adjust before you judge it.

OLED screens have no backlight, so they show no bleed at all. That is normal for OLED, and it is one reason OLED looks so clean at night.

Test 3: Color banding

Vice City is full of sunsets, skies, and neon gradients. If a smooth sky shows as visible steps, your TV is banding. The smooth gradient should look smooth. The stepped one shows the steps on purpose, so you know what banding looks like.

A 10-bit panel shows the smooth gradient smooth. An 8-bit panel, or heavy video compression, shows steps.

Test 4: Motion and refresh

A block moving across the screen. On a good panel it glides. On a slow panel it smears or judders. Watch the edges of the block as it moves.

Your measured refresh rate is shown above, in "Your screen right now". If it reads 60 Hz on a 120 Hz TV, check the TV game mode and the HDMI port.

Test 5: 3D motion clarity

A glowing ball flies across a checkered wall, and you steer the blue cube yourself with the arrow keys. If the ball smears, doubles, or leaves a trail, your panel is slow. If the cube lags behind your key presses, that is input delay you can feel. The frame rate shows live in the corner.

Press "Start 3D motion test" to load it.

Steer the cube with the arrow keys or W, A, S, D. Press Esc to stop. The 3D scene loads from the Three.js library the first time you start it. If it does not load, your connection blocked it, and the other four tests still work.

My result

A short summary of your screen, ready to copy or share. It says what this page measured, nothing more.

Run the checks above, then your result appears here.

About this TV screen test

Every test on this page runs in your browser, on your screen. The page fills the screen with a color or a pattern, and you look at it. That sounds simple, and it is the only way to test a screen: the answer has to come from your eyes on your panel, not from a review of a different panel.

Dead pixels are pixels that never light up. They are black on every color. Stuck pixels are subpixels stuck on, so they glow red, green, or blue. Backlight bleed is light leaking from the edges of an LCD panel on a black screen. Banding is a smooth gradient breaking into steps. None of these show in a photo of your TV, and none of them show in a spec sheet. They only show on the screen itself.

The GTA 6 verdict uses three facts your browser reports: resolution, HDR state, and refresh rate. Rockstar targets 30fps in GTA 6 on PS5 and Xbox Series X|S, so a 120 Hz panel does not change this game. 4K resolution and HDR do. That is why the verdict scores HDR and resolution first, and refresh rate last.

What this page cannot do: it cannot measure input lag, because that needs a camera and a timed flash. It cannot measure peak HDR brightness in nits, because the browser does not expose it. It cannot tell you the panel type or the maker. For input lag and brightness, measured in a lab, read our Best TV for GTA 6 guide. It lists the lab numbers for the LG C5 and C6, the Samsung S95F, and the TCL QM7L.

Frequently Asked Questions

Open this page on your TV, press Start pixel test, and look at each full screen color. A dead pixel stays black on every color and shows best on white. A stuck pixel stays lit in one color, usually red, green, or blue, and shows best on black. Move through the colors with the remote arrows, a click, or a tap. Press Esc to stop.
It reads what your TV browser reports: resolution, HDR state, and refresh rate. It gives a verdict from those three facts. GTA 6 targets 30fps on PS5 and Xbox Series X|S, so 4K and HDR matter more than a high refresh rate. What this page cannot measure is input lag and peak HDR brightness in nits. Those need lab tests, and our Best TV for GTA 6 guide lists the lab numbers.
It is the rate your browser draws frames, measured live on your screen over about two seconds. Most TVs report 60 Hz. A 120 Hz TV reports 120 Hz only if the TV and the browser are both running at that rate. If the number is lower than your TV supports, check the TV picture settings and the cable or port.
Run the bleed test in a dark room with the lights off. Look at the pure black screen first. Bright patches along the edges that stay put when you move your head are backlight bleed. A soft glow that shifts as you move is normal glow on some LCD panels, not bleed. OLED screens have no backlight, so they show neither.
Banding is when a smooth sky or sunset shows as visible steps instead of a smooth blend. Vice City has a lot of sky, sunsets, and neon gradients, so banding shows up there first. Run the banding test: if the smooth gradient looks stepped, your TV is showing 8-bit color or heavy compression. A 10-bit panel shows it smooth.
No. Every test runs in your browser on your device. Nothing is uploaded, nothing is stored, and there is no account. The page reads your screen details from the browser itself, the same way any web page can, and it forgets them when you close the tab.
Scan the QR code at the top of this page with your phone camera. It opens the test on your phone. Then cast your phone screen to your TV, or type cubbbix.com/tv-screen-test/ in your TV web browser. Most smart TVs have a browser app, and there is nothing to install and no account to make.

Related Tools

Was this tool helpful?

Comments

Loading comments...

Check Out Other Popular Tools